3. Car sunshade curtains are exposed to sunlight in dog days, and people sweat in less than a minute in the sun. similarly, if you love a car for a long time, not only the fashion in which people go in is as uncomfortable as a sauna, but also do great harm to the car. And under the exposure of the sun, the temperature inside the car with closed windows will rise sharply to 50 or 60 degrees Celsius or even higher, and the high temperature will damage the dashboard and leather seats.
The car is equipped with four-way adjustable main and auxiliary seat, which is wrapped in leather and fabric splicing material. At the same time, the rear seat can be put down by 5 stroke 5. In addition, the new car is also equipped with knob electronic block, air conditioning, main driving sunshade cosmetic mirror and inner rearview mirror driving recorder interface.
Although the solar greenhouse has a very good thermal insulation performance, but from the point of view of safety, heating equipment is still an important factor. The southern part of our country generally does not need to heat up, but if we encounter bad weather continuously, we still need to use the energy stored in the greenhouse itself, otherwise it will not be able to meet the growth of vegetables. Therefore, whether in the south or north, heating equipment has always been a necessary protective measure. The technical aspect requires that in the equipment configuration of solar greenhouse, the configuration of thermal insulation equipment should be demonstrated in great detail. Of course, the work of Kaifeng glass greenhouse requires the cooperation of a variety of equipment, with higher and higher temperature requirements, especially in autumn and winter production, external sunshade system, internal thermal insulation system and window opener and fan, wet curtain and other equipment need to be applied. For more information about the construction of Kaifeng glass greenhouse, please contact Minghao greenhouse Engineering Construction Company directly.
Among them, TPU and other polyurethane products can give full play to their unique advantages and have been used in a variety of automotive body parts, including car seats, cushions, headrest, floor mats, dashboards, sunshades, doors, ceiling linings and other internal parts as well as sound insulation and noise reduction materials, sealing materials and so on.
Air-conditioned buildings rely on refrigerators to move the indoor heat load to the outside in summer. Obviously, if the indoor heat load is reduced, the running time of the refrigerator will be reduced, and the energy consumption of the cooling tower system will be reduced. The indoor heat load comes from two aspects, one is the heat exchange caused by the indoor and outdoor temperature difference, and the other is the heat load caused by indoor lighting and equipment. Therefore, sunshade, airtight, thermal insulation and other methods can be used to reduce indoor heat load and achieve energy saving. 1, reduce indoor heat load (1) sunshade to reduce direct sunlight radiation roof, wall, window and through the window to enter the room, you can use eaves, sunshade panels (awnings), coated glass, etc.; reduce the heat radiation of the external walls and roofs, you can use light-colored exterior wall finishes to set the insulation layer on the outside of the external walls and roofs, or overhead roofs.
Go to the seaside or travel with your best friend, put on a sling skirt and do a good job of sunscreen, which will make your image more attractive. At the same time, you can choose sunglasses, bags, big sunshade hats and other items to match, so you can have a richer sense of styling experience.
The key points of the building ecological energy strategy and design for the renovation of the new German parliament building lie in the technical application and energy strategy of ventilation and lighting. After the reconstruction, the output of carbon dioxide in the building has been reduced by nearly 94%. Through the set path, the air is filtered and cooled into the building, and then the hot air and waste gas are discharged upward by the two-story dome through the building technology; natural lighting is realized by an inverted cone light reflector and a 360-degree tongue-shaped sunshade device, which is equipped with an air pipe and a heat converter, and the tongue-shaped device can rotate according to the change of the solar height angle during the day. The energy strategy adopted in the reconstruction of the building is more radical, including not only the use of solar power, but also the use of renewable “biodiesel” generators to generate electricity, coupled with the storage and recycling of geothermal heat.
[company profile] Beijing Ruiyan Automobile Decoration Co., Ltd. is a joint stock joint venture company jointly invested by China and South Korea, which mainly provides services for Beijing Hyundai Automobile Co., Ltd. and in its production of finished cars to supply 4 categories, 15 items, 48 kinds of high-quality products. The registered capital is 10.2 million US dollars, mainly in the development and manufacture of automobile moulds, fixtures, door guards, inner roofs, dashboards, seats, package plates, sunshades, carpets, rear box panels, column decoration panels, interior lamps and other automobile accessories, and sell self-produced products and provide technical services for self-produced products.